Give your desktop PC a boost in performance by adding Kingston's ValueRAM memory. It delivers superior quality so you can upgrade your system or build one to run with the speed and power you're looking for.
More Information
FEATURES:
- ValueRAM's 512M x 64-bit 4GB (4096MB) DDR3-1333 CL9 SDRAM (Synchronous DRAM) memory module, based on sixteen 256M x 8-bit DDR3-1333 FBGA components
- The SPD is programmed to JEDEC standard latency 1333Mhz timing of 9-9-9 at 1.5V
- This 240-pin DIMM uses gold contact fingers and requires +1.5V
- Specifications: Standard 512M X 64 Non-ECC 1333MHz 240-pin Unbuffered DIMM (DDR3, 1.5V, CL9, FBGA, Gold)
- JEDEC standard 1.5V ± 0.075V Power Supply
- VDDQ = 1.5V ± 0.075V
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal banks
- Programmable CAS Latency: 5,6,7,8,9,10
- Posted CAS
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7(DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address '000' only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal (self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
- Asynchronous Reset
- Performance: CL(IDD) 9 cycles, Row Cycle Time (tRCmin) 49.5ns (min.), Refresh to Active/Refresh Command Time (tRFCmin) 160ns, Row Active Time (tRASmin) 36ns (min.), Power 1.380 W (operating), UL Rating 94 V 0